Try free
· 9 min read · By Daniel Shilansky, Founder, TomeVox

How to Fix AI Mispronunciations in Your Audiobook

To fix an AI narrator mispronouncing a name or term, log the exact word and chapter, replace it in the narration text with a phonetic respelling such as Siobhan → shiv-AWN, use an SSML phoneme tag only where your engine supports it, regenerate just that chapter, then check the word sounds the same across every chapter it appears in.

Mispronunciation is the single most common objection to AI narration, and it is also the most fixable. Unlike a human narrator who has already left the recording booth, an AI narrator can be corrected and re-run in minutes, so a wrong reading of a character name or a piece of jargon is a quick remediation rather than an expensive retake.

Preventing mispronunciations up front is a different job: if you have not produced any audio yet, build a glossary first with the companion post on building a pronunciation guide for your audiobook, and clean your text before submission with the manuscript preparation checklist.

An audio waveform with a tangled knot in the middle, and a fountain pen nib smoothing the knot back into a clean glowing amber wave
A mispronunciation is a fixable knot in the audio: change what the narrator reads and you change what it says.

How do I fix a mispronunciation with a phonetic respelling?

A phonetic respelling rewrites a word the way it sounds using ordinary letters, and it is the first and most reliable fix because it works on almost every engine without any markup. Break the word into syllables, spell each syllable the way it sounds, separate them with hyphens, and capitalise the stressed syllable so the narrator knows where the emphasis falls. The respelling goes into the narration text in place of, or alongside, the original spelling.

Original wordPhonetic respellingWhy it trips the AI
Siobhanshiv-AWNIrish spelling, no phonetic relationship to sound
NguyenWINVietnamese surname, silent letters
BeauchampBEECH-umAnglicised French, spelling misleads
Hermioneher-MY-oh-neeFour syllables, easy to compress
Caradhraskah-RAD-rassInvented name, no training reference
SQLS-Q-L or "sequel"Acronym read either way; you must pick

The takeaway from the table is that good respellings are intuitive, not technical: you are writing what a friend would scribble on a sticky note, not a linguistics paper. Test each respelling by reading it aloud yourself: if a stranger would say it correctly, the AI usually will too. Keep every respelling you write in a running log so you can reuse it for the same word later in the book, which is the foundation of the consistency check covered below.

Why does an AI narrator mispronounce names and terms?

An AI narrator mispronounces words because it predicts pronunciation from spelling and its training data, and many words are not spelled the way they sound. Invented fantasy and sci-fi names, foreign and unusual surnames, place names, acronyms, initialisms, and specialist jargon all fall outside what the model can reliably guess. The engine has no way to know that Siobhan is said shiv-AWN, that Nguyen is closer to WIN, or whether SQL should be read as "sequel" or spelled out letter by letter.

The good news is that almost every mispronunciation has a deterministic cause and therefore a deterministic fix. The narrator is not being random; it is reading the spelling in front of it. Change what it reads and you change what it says.

How do I find every mispronunciation before I fix it?

Find mispronunciations by listening to each chapter end to end and logging every word the narrator gets wrong, because a fix you cannot find is a fix you cannot make. Listen at normal speed with the manuscript open, and for each error write down four things: the exact word, the chapter it appears in, the timestamp, and how it should be said. A simple table beats memory because the same name often recurs in chapters you have not reached yet.

Pay closest attention to the categories most likely to trip the engine: proper nouns, foreign words, invented terms, acronyms, and numbers or dates read in an odd format. The manuscript preparation checklist lists these flashpoints in full. Catching them in a single careful pass is far faster than discovering them piecemeal, and it lets you batch all the fixes for a chapter into one regeneration instead of several.

When should I use SSML or phonemes instead?

Use SSML or phonemes only when a plain respelling fails and your specific engine documents support for them, because most mispronunciations never need this level of control. SSML (Speech Synthesis Markup Language) is a W3C tagging standard, and its <phoneme> tag lets you force an exact pronunciation using a phonetic alphabet such as IPA or X-SAMPA, for example wrapping a word so it is read as the precise sequence of sounds you specify rather than guessed from spelling. The W3C maintains the SSML 1.1 specification, and engine vendors such as Google Cloud Text-to-Speech document which tags they actually accept.

The catch is that SSML support is uneven: many consumer-facing AI narration tools accept only a subset of tags, or none at all, so a phoneme tag that works in one engine is read aloud as literal text in another. Check your engine's documentation before relying on it, and treat IPA-based phoneme tags as a last resort for stubborn words where a respelling genuinely cannot capture the sound. For the large majority of names and terms, a respelling is faster, more portable, and just as accurate.

How do I regenerate just the affected chapter?

Regenerate only the chapters that contain the corrected word rather than the entire book, because per-chapter regeneration is faster and avoids re-introducing fixes you have already verified elsewhere. Most self-serve AI audiobook tools are built around discrete chapters, so if you produce the book yourself the workflow is: edit the narration text for that chapter, regenerate that chapter alone, and listen back to the specific passage to confirm the fix landed. If the word appears in several chapters, apply the same respelling to each and regenerate that set.

The economics of AI remediation differ sharply from human narration. A human narrator charges for studio retakes; an AI chapter can be re-run on demand. With TomeVox you don't run this loop yourself: we handle names and invented words before narration, and if one still comes out wrong you flag it in an included revision round (2 for Narrated, 3 for Performed), with no extra production fee. The corrected chapter comes back in the same M4B with chapter markers and per-chapter MP3 files. For the full production workflow this fits into, see the AI audiobook production guide.

How do I keep pronunciation consistent across the whole book?

Keep pronunciation consistent by maintaining a single pronunciation log and applying the same respelling everywhere a word appears, then spot-checking it after every regeneration. The risk with chapter-by-chapter fixes is that you correct Caradhras in chapter three but leave the original spelling in chapter nine, so the same name is said two different ways across the book, which is more jarring to a listener than a single consistent error. A shared log is the antidote.

After regenerating, confirm the corrected word matches in at least two other chapters where it occurs, listening to the actual audio rather than trusting that the same text produces the same output. The most reliable consistency check is a human ear, which is why TomeVox has a person review every audiobook before delivery rather than relying on the model alone. Building that log up front, before any audio exists, is exactly the job of a pronunciation guide; remediation is simply maintaining and extending that same log as new errors surface.

A repeatable workflow for fixing mispronunciations

Pulling the steps together, here is the workflow to run whenever you hear a mispronunciation in a generated chapter. Follow it in order, because each step is cheaper and simpler than the one after it, and most words are resolved by step two.

  1. Listen and log. Note the exact word, chapter, timestamp, and intended pronunciation in a single table.
  2. Respell phonetically. Rewrite the word the way it sounds, with hyphens between syllables and the stressed syllable capitalised.
  3. Escalate to SSML only if needed. If respelling fails and your engine documents <phoneme> support, force the sounds with IPA or X-SAMPA.
  4. Regenerate the chapter. Re-run only the affected chapter and listen back to the exact passage.
  5. Check consistency. Confirm the word is said the same way in every other chapter it appears in, and update your pronunciation log.

Run this loop until the chapter is clean. Because each pass is cheap on an AI engine, there is no reason to ship an audiobook with a name said wrong. The same discipline applies whether you are fixing one stubborn surname or polishing a fantasy novel full of invented terms.

Where TomeVox fits when you need to fix mispronunciations

With TomeVox, you don't respell names or regenerate chapters yourself. Before narration, we find the names, places, invented words and foreign terms in your manuscript and settle how each one is said from your book's context, so it sounds the same in every chapter. You can hear the voice on your own text first through a free first-chapter preview with no credit card required. If a name still isn't how you say it, you flag it in one of your revision rounds (2 for Narrated, 3 for Performed); there is no per-retake fee.

A person reviews every TomeVox audiobook before delivery, which is the consistency check that catches the mispronunciations a model would miss and confirms a corrected name is said the same way throughout. TomeVox delivers a downloadable M4B with chapter markers plus per-chapter MP3 files, supports 13 languages, gives you full commercial rights with no exclusivity, and is EU-based in Berlin under GDPR, with most books finished within 24 hours. Because the file is yours outright, a clean, correctly pronounced recording is ready to sell. See where to sell an AI audiobook for the channels open to it.

ElevenLabs' self-serve app is the other route many authors try, but it leaves the manuscript preparation, regenerations and checking to you, and for a full book TomeVox costs less. Against ElevenLabs Productions, the company's done-for-you service, TomeVox offers the same quality or better at a fraction of the price, with a much faster turnaround.

Frequently asked questions

Why does my AI narrator mispronounce names and terms?

AI narrators predict pronunciation from spelling and training data, so they stumble on words that are not spelled the way they sound: invented fantasy names, foreign names, surnames, place names, acronyms, and specialist jargon. The engine has no way to know that Siobhan is said shiv-AWN or that a character name should be stressed on the second syllable. The fix is to tell it explicitly, usually with a phonetic respelling, and then regenerate the affected chapter.

What is a phonetic respelling and how do I write one?

A phonetic respelling rewrites a word the way it sounds using ordinary letters, so the AI reads the sounds rather than the original spelling. Break the word into syllables, spell each syllable the way it sounds, separate them with hyphens, and put the stressed syllable in capitals, for example Nguyen as WIN or Beauchamp as BEECH-um. Respellings are the first and most reliable fix because they work on almost every engine without any markup.

Do I have to regenerate the whole audiobook to fix one word?

No. You only need to regenerate the chapters that contain the mispronounced word. Most self-serve AI audiobook tools work chapter by chapter, so you correct the text, regenerate just that chapter, and listen back. With TomeVox you don't do this yourself: we handle pronunciation before narration, and a name you flag goes into an included revision round (2 for Narrated, 3 for Performed) at no extra production fee.

What is SSML and do I need it to fix pronunciation?

SSML (Speech Synthesis Markup Language) is a tagging standard that lets you control speech output, including a phoneme tag that forces an exact pronunciation using IPA or X-SAMPA. You rarely need it: a plain phonetic respelling fixes most mispronunciations. SSML is only worth reaching for when respelling fails and your specific engine documents support for the phoneme tag, because not every consumer AI narration tool accepts SSML.

How do I keep a name pronounced the same way across the whole book?

Keep a pronunciation log listing every name and term with its agreed respelling, and apply the same respelling everywhere the word appears. After regenerating, spot-check the word in at least two other chapters to confirm it matches. With TomeVox, keeping names consistent is our job: we settle each name before narration, and a person reviews every audiobook before delivery.

Hear your first chapter free before you pay

Upload your manuscript to TomeVox, choose a voice, and get a free first-chapter preview with no credit card. Hear a name said wrong? Flag it in a revision round at no extra cost, and get the full audiobook as an M4B + per-chapter MP3 within 24 hours for a flat $49–$99 Narrated or $149–$299 Performed, with full rights and no exclusivity.

Try TomeVox Free